Page 6 of 6
Re: Need Fig.25-24, p/n 0512108-5 Bulkhead Assembly Angle -
Posted: Wed Nov 07, 2018 5:01 am
by DaveF
Right now on ebay Beegles is selling the "as removed" angle p/n 0512108 from 170A s/n 19029. Pics show circular holes.
- Stabilizer angle 0512108.jpg (105.19 KiB) Viewed 10768 times
Re: Need Fig.25-24, p/n 0512108-5 Bulkhead Assembly Angle -
Posted: Fri Nov 09, 2018 12:16 am
by c170b53
Just wondering whether the location of the round holes changed during production. Just another piece of data for Bruce to capture
Re: Need Fig.25-24, p/n 0512108-5 Bulkhead Assembly Angle -
Posted: Fri Nov 09, 2018 3:48 pm
by GAHorn
c170b53 wrote:Just wondering whether the location of the round holes changed during production. Just another piece of data for Bruce to capture
I queried Pete Jones over at Air Repair about round vs slotted holes and he said he'd never seen a slotted hole. But if the horiz/stab were re-positioned slightly in the L19 to require the hole to be situated further forward... then a slotted angle might accommodate both airplanes with one part-number.
While this is an interesting postulation,... it's important for folks to understand it's a commonly-found
and correct (Cessna-made) part.... not one that's been improperly altered.
Re: Need Fig.25-24, p/n 0512108-5 Bulkhead Assembly Angle -
Posted: Sun Jun 07, 2020 12:11 am
by akfowlplay
I have what looks like a new one if anyone is interested. Looks like they are not made anymore. pN 0512108 c170 angle stab attach. Has the slotted holes.
Rich
907-252-7455