We are doing a re-furbish on our new to us airplane. Does anybody have a good idea or picture of a yoke mounted PPT switch? Unfortunately, our new nav/com is mounted under the yoke push/pull knob, and a curly cord may interfere with the view of the radio. Any ideas are welcome!
Frank Hale & Greg Eller, N3006A, Cessna 170B
Ideas for a yoke mounted Push to Talk
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Re: Ideas for a yoke mounted Push to Talk
Great advice: Don't drill your original yoke!
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
Re: Ideas for a yoke mounted Push to Talk
If it's a refurbish, can you move the radio? I used a Velcro mounted PTT. Not elegant, but works. I agree with gahorn, don't drill the yoke.
Terry Gandy
Don't stop flying the plane until it's tied down or the paramedics arrive
Don't stop flying the plane until it's tied down or the paramedics arrive