Page 1 of 1
1951 Cessna 170A oil temperature gauge
Posted: Tue Jul 09, 2013 4:47 pm
by stephenpaige
Any ideas where to find a replacement oil temp gauge for a 1951 170A? Also any idea of the part number?
Re: 1951 Cessna 170A oil temperature gauge
Posted: Tue Jul 09, 2013 7:10 pm
by bagarre
This might help
http://cessna170.org/forums/viewtopic.php?f=24&t=10685
But all it did was confuse me further
Re: 1951 Cessna 170A oil temperature gauge
Posted: Tue Jul 09, 2013 9:49 pm
by n2582d
Stephen, The part number you are looking for is 0411017-3. Take a look at
this link for repair shops before buying a new one. I've also heard good things about
Rudy Aircraft Instruments. If you have your's rebuilt have the redline moved up from 225 degrees to 240 degrees. Also be aware of the need for the right adapter. See the write-up in the
Mx Library and
Scott's Service Information Letter. Use the search function at the top of this website. Start with "oil temperature gauge" using the quotation marks around the three words.
Any luck selling your plane? Looks sharp in the pictures but the oil temp does look a bit low!
Re: 1951 Cessna 170A oil temperature gauge
Posted: Wed Jul 10, 2013 12:49 am
by cessna170bdriver
n2582d wrote:... If you have your's rebuilt have the redline moved up from 225 degrees to 240 degrees. ...
ONLY if you're using single-weight Aeroshell.
Re: 1951 Cessna 170A oil temperature gauge
Posted: Wed Jul 10, 2013 6:14 am
by GAHorn
cessna170bdriver wrote:n2582d wrote:... If you have your's rebuilt have the redline moved up from 225 degrees to 240 degrees. ...
ONLY if you're using single-weight Aeroshell.
Does not have to be AeroShell. (just has to be SAE 50 wt oil....not multigrade. See the engine type cert.)
Doubtless there will be some nay-sayer who will point out that TCM's change in the type cert. does not automatically transfer to the engine's installation in a C-170, nor does it authorize the change of red-line on the Cessna Oil Temp gauge. (But I'd still operate at the higher limit and be happy about it.)
Re: 1951 Cessna 170A oil temperature gauge
Posted: Wed Jul 10, 2013 2:16 pm
by lowNslow
gahorn wrote:
Does not have to be AeroShell. (just has to be SAE 50 wt oil....not multigrade. See the engine type cert.)
Doubtless there will be some nay-sayer who will point out that TCM's change in the type cert. does not automatically transfer to the engine's installation in a C-170, nor does it authorize the change of red-line on the Cessna Oil Temp gauge. (But I'd still operate at the higher limit and be happy about it.)
Isn't Aeroshell the only game in town for single grade oil?
Re: 1951 Cessna 170A oil temperature gauge
Posted: Wed Jul 10, 2013 8:27 pm
by N2255D
Re: 1951 Cessna 170A oil temperature gauge
Posted: Thu Jul 11, 2013 1:04 am
by GAHorn
Castrol, BP, EXXON-Mobil, Phillips, Aeroshell, the list goes on...
Here's Castrols listings:
http://www.castrol.com/liveassets/bp_in ... stL2EX.pdf
Re: 1951 Cessna 170A oil temperature gauge
Posted: Thu Jul 11, 2013 6:38 pm
by cessna170bdriver
gahorn wrote:...Does not have to be AeroShell. (just has to be SAE 50 wt oil....not multigrade. See the engine type cert.)...
Thanks for the clarification, George. I had no idea there were that many 50wt aviation oils out there...
Re: 1951 Cessna 170A oil temperature gauge
Posted: Thu Jul 11, 2013 10:52 pm
by T. C. Downey
stephenpaige wrote:Any ideas where to find a replacement oil temp gauge for a 1951 170A? Also any idea of the part number?
Which Face are you looking for there are three versions of this gauge.
I have one you may buy if it is the one you are looking for.
I'll get pictures tomorrow.