Torque Spec
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
N73087
Torque Spec
Does anyone have a torque spec for the 3 nuts securing the tach drive housing?
-
steve grewing
- Posts: 82
- Joined: Sun Sep 26, 2004 2:44 pm
Go to:
http://www.tcmlink.com/servicebulletins/index.cfm
and open SB 96-7C, the section on general torque specifications. It's all in there.
Steve
http://www.tcmlink.com/servicebulletins/index.cfm
and open SB 96-7C, the section on general torque specifications. It's all in there.
Steve
According to the TCM Overhaul Manual (which I know you'd never work on your engine without) those 1/4-28 nuts should be torqued 100-125 in-lbs.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.