Oil adapter gaskets
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
Oil adapter gaskets
I have the F&M 300-T oil adapter, (now Tempest CO 300). I have the 2 large gaskets for the adapter, I need the part number for the copper crush gasket that goes between the oil adapter and the oil pressure sensor adapter. It is a copper crush gasket about the size of a spark plug copper gasket. Thanks!
Re: Oil adapter gaskets
SB-001 Rev B changes the gasket to AN900-28 copper crush gaskets in both locations.n2715d wrote:I have the F&M 300-T oil adapter, (now Tempest CO 300). I have the 2 large gaskets for the adapter, I need the part number for the copper crush gasket that goes between the oil adapter and the oil pressure sensor adapter. It is a copper crush gasket about the size of a spark plug copper gasket. Thanks!
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
Re: Oil adapter gaskets
I think you mean oil temperature rather than oil pressure sensor adapter. The O-300 IPC shows a AN900-10 there. If you have the electric sensor (p/n S2335-1) Cessna Service Kit SK182-108B calls for p/n 0015-00724. This crosses to Rochester p/n 3080-37. In addition to being aware of "issues" with the oil filter adapter, also make sure you have the correct oil temperature sensor adapter. It is discussed here.
Gary
Re: Oil adapter gaskets
Thanks! That did the trick and we are aware of the need to safety tie the adapter and replaced those gaskets too.