Repairing a leaking oil pan

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

pcarbin
Posts: 1
Joined: Mon Jul 25, 2011 2:10 pm

Re: Repairing a leaking oil pan

Post by pcarbin »

Anyone have a good used oil sump for an O-300 that they want to sell? Mine has corrosion and is leaking just aft of the front drain plug.

Thanks, Paul
User avatar
blueldr
Posts: 4442
Joined: Thu May 02, 2002 3:16 am

Re: Repairing a leaking oil pan

Post by blueldr »

Use cauyion when buying an oil sump. They are not all interchangeable. You need and should have a specific part number for the particular part type to fit your engine.
BL
User avatar
cvj774
Posts: 19
Joined: Sat Aug 18, 2012 7:13 pm

Re: Repairing a leaking oil pan

Post by cvj774 »

I have the same problem. My pan was repaired by Drake Air in 2011. I now have a crack outside of the welded area.
I see three choices.
Send the pan back to Drake, find a replacement, or send to Okanagan Aero for an epoxy repair.

How about some advice from those who have been down this trial.

Carl
hilltop170
Posts: 3481
Joined: Sat May 06, 2006 6:05 pm

Re: Repairing a leaking oil pan

Post by hilltop170 »

Okanagan Aero will not repair a welded pan unless they have changed their minds.
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
Post Reply