Oil Cooler

A place to relax and discuss flying topics.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
170C
Posts: 3182
Joined: Tue May 06, 2003 11:59 am

Oil Cooler

Post by 170C »

Noticing in the ad for the 48 170 For Sale that it shows to have an oil cooler. I have a friend (new member) with an O-300C that has about 1400 hours smoh. It has one of the oil temp gauge with just green & red markings. While no tests have been performed to determine the accuracy of the gauge, on these 90 degree, Middle Tennessee days after a couple of takeoffs the gauge shows to be just into the RED. Are there oil coolers available for O-300 Continentals?
OLE POKEY
170C
Director:
2012-2018
User avatar
KS170A
Posts: 239
Joined: Thu May 26, 2005 4:31 pm

Re: Oil Cooler

Post by KS170A »

This one is the only one I know of. Your friend's oil temp is probably right, unfortunately.

A gauge without numbers is almost useless, as depending on which oil he is using he could go past the standard 225° limit to 240° by using 100W (SAE 50) oil.
--Josh
1950 170A
User avatar
Bruce Fenstermacher
Posts: 10313
Joined: Tue Apr 23, 2002 11:24 am

Re: Oil Cooler

Post by Bruce Fenstermacher »

Oil coolers where available for OTHER aircraft. According to the IPC only used on the C-125 and C-145-2 but not the 0-300 series. They are used on the Swift for example when it is converted to C-145. I wouldn't be surprised if they could actually be used with the 0-300 but not marketed for them.

They are not necessary on a 170.
Oil cooler available for the 0-300 but not needed on the 170
Oil cooler available for the 0-300 but not needed on the 170
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
User avatar
KS170A
Posts: 239
Joined: Thu May 26, 2005 4:31 pm

Re: Oil Cooler

Post by KS170A »

Bruce Fenstermacher wrote:They are not necessary on a 170.
I'm assuming you mean that for certification purposes. Seems like from the number of comments and articles regarding high oil temperature, perhaps not "necessary" but a pretty good idea.
--Josh
1950 170A
User avatar
GAHorn
Posts: 20968
Joined: Fri Apr 12, 2002 8:45 pm

Re: Oil Cooler

Post by GAHorn »

The majority of interest in oil coolers for our 170s is due to several things:
1- Inaccurate oil temp gauges
2-Poor-fitting or missing engine cooling baffling.
3-Leaking exhaust pipes heating pushrod tubes.
4-Out of date operating info (later type cert. on this engine allows higher oil temp to 240-F when SAE 50 oil is used.)
5-Installation differences from other aircraft which the operator has previous experience leading him/her to incorrect conclusion.

Bruce is correct: a properly maintained 170 with 145/O300 engine does not need an oil cooler.

Many operators of this engine in other aircraft complain of too COOL oil temps and worry about condensation/water in their oil not being boiled off. It's a humorous observation to read those opposing operating problems. They go to all kinds of lengths to increase their oil temps while 170 owners do the opposite.

The bottom line is : You can largely ignore your high-end oil temps, especially if you use SAE 50 straight wt oil, if your cowling/baffles are in good condition.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
Post Reply