L-19 tow lugs on 180 gear legs
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
- learaviator
- Posts: 174
- Joined: Wed Dec 31, 2008 5:20 pm
L-19 tow lugs on 180 gear legs
I purchased a set of these for my 170 that has 180 gear legs. The lower bolts in my gear are -6 bolts and of course the lugs are drilled for -5 bolts. I am planning to drill the lugs out for the larger bolts. Or I could put them on the upper two bolts. Has anyone else been through this? Just trying not to re-invent the wheel LOL
"You can only tie the record for flying low"
1950 170A N9907A 180hp. STOL
1950 170A N9907A 180hp. STOL
-
- Posts: 3481
- Joined: Sat May 06, 2006 6:05 pm
Re: L-19 tow lugs on 180 gear legs
Just happened to take this picture yesterday after landing at a friend’s grass runway.
Del Lehman at Mountain Airframe installed these L19 tow lugs last year.
Del Lehman at Mountain Airframe installed these L19 tow lugs last year.
Last edited by hilltop170 on Wed Apr 01, 2020 5:42 pm, edited 1 time in total.
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
- learaviator
- Posts: 174
- Joined: Wed Dec 31, 2008 5:20 pm
Re: L-19 tow lugs on 180 gear legs
Awesome! That's how I will do it! Thank You!
"You can only tie the record for flying low"
1950 170A N9907A 180hp. STOL
1950 170A N9907A 180hp. STOL