Search found 275 matches
- Mon May 27, 2024 3:22 pm
- Forum: The Hangar
- Topic: Dents forming in the wing from the sun
- Replies: 7
- Views: 109
Re: Dents forming in the wing from the sun
Has the leading edge always been painted a dark color?
- Mon Feb 26, 2024 11:29 pm
- Forum: The Hangar
- Topic: $170 Leaf Spring Bushing
- Replies: 20
- Views: 7072
Re: $170 Leaf Spring Bushing
It is just amazing to me that Textron thinks that is a good business plan.......
- Sun Feb 25, 2024 3:39 pm
- Forum: The Hangar
- Topic: Mixture/Prop/Throttle replacement for 180hp 170B
- Replies: 11
- Views: 2255
Re: Mixture/Prop/Throttle replacement for 180hp 170B
It's a little hard to tell in the photo, but if the cable is clamped to both the firewall and a component of the engine, and if the clamps are not fairly widely spaced, then something has to give when the engine moves around a little in its mounts.
- Sun Feb 04, 2024 1:45 pm
- Forum: The Pilot Lounge
- Topic: Five weeks of adventure with my Super 170
- Replies: 41
- Views: 9431
Re: Five weeks of adventure with my Super 170
Yes, very much enjoying your trip report!
Brings back memories of trips I have taken too!
Brings back memories of trips I have taken too!
- Fri Jan 19, 2024 6:50 pm
- Forum: The Hangar
- Topic: New Flap Tracks
- Replies: 11
- Views: 1363
Re: New Flap Tracks
Just guessing that quaffing is an integral part of the flap track replacement process.
- Fri Jan 05, 2024 8:39 pm
- Forum: The Hangar
- Topic: Stall Warning Horn
- Replies: 20
- Views: 1038229
Re: Stall Warning Horn
You may be right, Bruce!Bruce Fenstermacher wrote: ↑Fri Jan 05, 2024 7:08 pm Guys, skifast13 is talking about the cap found in the bakelite warning horn/lite.
But the skifast post was so vague that it is hard to tell with certainty.
- Fri Jan 05, 2024 1:32 pm
- Forum: The Hangar
- Topic: Stall Warning Horn
- Replies: 20
- Views: 1038229
Re: Stall Warning Horn
Are you sure that you are not mistakenly calling a heater by the name "capacitor".
- Mon Nov 13, 2023 1:01 pm
- Forum: The Hangar
- Topic: Scott 3200 attachnment bolt
- Replies: 18
- Views: 220106
Re: Scott 3200 attachnment bolt
In case you need a third person to confirm that the king pin is supposed to be a non-removeable press fit in the top bracket, I'll be that guy.
I would not put it back together without fixing that issue.
I would not put it back together without fixing that issue.
- Fri Oct 27, 2023 12:26 pm
- Forum: The Hangar
- Topic: Main Tailwheel Leaf Spring Comparison
- Replies: 16
- Views: 45936
Re: Main Tailwheel Leaf Spring Comparison
Isn't that spacer to bush the hole in the Scott 3200 bracket and spring adapter (not the tailspring)?
The spacer which goes in the hole at the front end of the spring, and ties the spring leaves together, should be a fairly close fit to the spring stack and to the bolt.
The spacer which goes in the hole at the front end of the spring, and ties the spring leaves together, should be a fairly close fit to the spring stack and to the bolt.
- Tue Aug 22, 2023 11:37 am
- Forum: The Hangar
- Topic: Crankshaft Rust
- Replies: 8
- Views: 19261
Re: Crankshaft Rust
Perhaps.Flywheel wrote:
I feel the torque load is not as high as in a car (unless you have a prop strike).
But the gyroscopic loads are much higher.
- Sun Aug 13, 2023 11:59 pm
- Forum: The Hangar
- Topic: Crankshaft Rust
- Replies: 8
- Views: 19261
Re: Crankshaft Rust
A&P says (In connection with a Continental O200 top overhaul) the crankshaft has too much rust between engine housing and propeller (outside engine). I'm thinking the crankshaft diameter reduction and strength reduction from rust is less than 1% and irregular distributed over the length and dia...
- Wed Jul 12, 2023 10:34 am
- Forum: Events/Fly-ins
- Topic: 75th Reunion Celebration group parking at Airventure 2023
- Replies: 80
- Views: 456106
Re: 75th Reunion Celebration group parking at Airventure 202
I’m just curious why we’re to display Vintage Aircraft CAMPING (VAC) …instead of VAP (Vintage Aircraft Parking)…. (EVEN IF we’re not Camping with our airplanes..??) or is this simply a more expedient way to get us all parked together as a group..? George, it is because the special C170 parking area...
- Sat Jul 08, 2023 12:23 am
- Forum: The Hangar
- Topic: Help! "New" 170 with non-standard fuel caps
- Replies: 9
- Views: 15163
Re: Help! "New" 170 with non-standard fuel caps
I don't know if the metallizing STC covered that change or not. But, I suspect that it actually is a better fuel cap arrangement than the original '48 C170, which is very prone to water leaks. I can see why some previous owner would have wanted to make a change. Of course, the seals and sealing surf...
- Sat Jun 03, 2023 3:21 pm
- Forum: The Pilot Lounge
- Topic: Convention
- Replies: 14
- Views: 42846
Re: Convention
I am pretty sure that Canada is not part of the USA!Mike Gourd wrote:If this is the "INTERNATIONAL Cessna 170 Association", then perhaps a convention could be held outside of the USA.
- Sun May 28, 2023 10:16 am
- Forum: The Pilot Lounge
- Topic: Convention
- Replies: 14
- Views: 42846
Re: Convention
#3 on the map list says Dayton, Colorado.
But the dot on the map sure looks like it is more likely to have been Dayton, Ohio!
But the dot on the map sure looks like it is more likely to have been Dayton, Ohio!