The International Cessna 170 Association

I recently bought a 185 and am looking for a good set of floats. I'm up in Homer AK. If any alaska guys know of any good 185 floats around it would be greatly appreciated!! Looking for EDO 3430's or PK 3500c's thanks Corey. 218-390-3680

Thanks for the info, I've done all I could with adjustments and still can't quite make it. I shimmed the skis on the axles a little bit to gain some room, played with the rigger mounts and anything else I could see, I think if I didn't have the goodyears I would be fine. I only need about another 1/...

Anybody running 800 tires with awb 2500 skis? I have Goodyear 8.50 x 6 and they will not work with the skis, the riggers hit the sidewall when skis are down, I need to order some 800's but don't know if the goodyears will be narrow enough. Does anybody have measurement of some different brand tires ...

Any members interested in making the trip from Alaska to the lower 48 ? I need to get my plane down there for the winter but had some issues at the border. I've made the trip a few times and could give info on the route and planning. Any other ideas would be greatly appreciated. I'm in Homer now but...

Is anybody a member on parts base that could look up a couple of Edo part # 05505 and 05506

If you want a cruise prop stick with the short one, if you want a climb prop get an 80", no comparison to the short props. I will never bolt on the short prop again. I get about 800-900fpm climb at gross wt. I am rumming an 8040. it's a little thin but performs good.

I got "busted" for 8.50 x 6 tires last week in Palmer, what I got out of it is I need to produce a field approval for the single puck brake application or install double puck brakes which would be ok. Any info on this?

Float kit drawings do not exist, I installed the parts in mine last winter, the best thing is to go look at one with floats and measure. The parts book is only helpful for part numbers. I can help you if you need it.

Has anyone got a field approval for goodyear 26" tires? I just got a set and want to put them on.

By the way, i was still wondering if anyone has the dimensions, it would be greatly appreciated, otherwise I can just do some measuring and figuring.

Does anyone have the dimensions for these bushings so I can get some made?

I know I've seen the measurements for cutting the holes in the roof skin on here but now that I need them I can't find them.

I have all the 170 parts, looking for how and where the cables attatchment and plumbing

I just got a set of awb 2500 and am looking for some installation drawings and/ or advice.

I'm going to start the install of my float kit and still need part #0541127 does anybody have one or a template to make one, i also need the lifting eyes and a v brace. The 0541127 is an angle on the bottom of the station 90 rib. Any tips and advice would be great, along with any install drawings if...